Printing Press Precautions

1. Ensure that the leader is responsible for supervising the safety of machine equipment and unit operators.
2. Before work, workers must wear work clothes, work caps, and work shoes neatly, fasten their lapels and cuffs, and do not put any debris in their pockets that may easily fall out, and do not wear watches or various accessories.
3. Before starting the machine, add the required lubricating oil (grease) to each oil filling point, lubrication point and oil tank of the machine.
4. Without approval, non-crew members are not allowed to start or operate the machine. Assistants and apprentices should work under the guidance of the pilot.
5. Before starting the machine, you should check whether there are any debris in various parts of the machine body. You must first give a signal (press the safety bell) and echo back and forth to ensure that the surrounding area of the machine is safe before starting the machine.
6. Before running the machine, first run counterclockwise for several weeks, and then on-time for several weeks to prevent debris between the rollers from damaging the blanket, printing plate, etc.
7. When the machine is running, it is strictly forbidden to touch the moving working surface with hands. It is not allowed to repair or wipe the machine. It is not allowed to cross the rotating parts. The machine protection device must be kept complete.
8. Crew members should strictly adhere to their positions according to their division of labor, always pay attention to the operation of various parts of the machine, and stop the machine immediately if any problems are found.
9. The work site should be kept clean and smooth, and the ground. There should be no debris around the workbench and machine, and maintenance tools and spare parts should be placed in specified locations.
10. While working, no one is allowed to laugh, play, or make loud noises around the machine. Please keep children away from the machine.
11. At the end of the work, clean the machine, protect the printing plate, clean the blanket, impression roller and pillow, turn off the power, and fill in the work log.
12. Regular maintenance and repair of machines, and filling in maintenance and repair record data can extend the service life of the machine, improve production quality and safe production.
13. Non-staff members are prohibited from operating.