1. One thing to do is that the size deviation of non -drying products should not be too large. Be careful to design your own unspeakable products. The error must be controlled within 0.5mm.
2. Symmetry of adhesive coating directly affects the separation force between the identity and the bottom paper, and the number of separation forces directly damage the mold cutting and waste emissions and the speed of the equipment. The separation force also determines the bidding of the logo, that is, the application state. In addition, the amount of pointing can also damage the leakage of the inner holes in the raw material. Therefore, when purchasing dry glue materials, you should carefully detect and choose raw materials suitable for dot glue and silicon coating.
3. Pressure and even the color of ink should be specified. The printing text should be very clear. The part cannot be printed without printing when printing, which is very accurate. Therefore, printing non -drying labels must generally design specific printing text formats in advance, including specific text formats and ink color.
4. The printing layout must also be designed, and the layout should be consistent with the specific design finished products. If a cover is required, the error and accuracy of the chapter should be controlled within 1.5mm.
5. The uniformity of the thickness of the surface material on the bottom paper is not only related to packaging printing characteristics, but also a key standard for determining the molten cutting uniformity and waste emissions speed. If the thickness of the surface of the bottom paper is uneven, the label machine cannot be quickly produced.
6. Printing non -drying labels must be neat and beautiful, that is, no adhesion, shadow, or even dirt on the surface, and the cutting must be perfect. The printing surface should be clean, the font cannot be blurred, nor can it fail.
